Honed or exposed aggregate: which suits which part of your home.
Honed concrete is ground smooth. Exposed aggregate is washed back so the stone shows. DSL Concrete lays both on driveways, paths, steps and pool surrounds across the northern coastal suburbs.
What is the difference between honed and exposed aggregate concrete?
Honed concrete is ground to a smooth surface with a subtle sheen. Exposed aggregate is concrete with the surface washed back so the natural stone in the mix shows. That gives a textured finish.
Both finishes show the stone in the mix. They get there in different ways.
In an exposed aggregate finish, the stones near the surface are revealed. A thin layer of cement paste would otherwise hide them. Cement Concrete & Aggregates Australia (CCAA) describes this as the definition of the finish, and lists several ways to do it, including water wash-off, abrasive blasting and honing.
Honing is a grinding process. It removes the surface layer and cuts through the stones, which leaves a smooth surface. CCAA notes that grinding marks can show, especially on the stones.
DSL Concrete does both. It does not offer polished concrete, which is ground further to a high gloss. Read more about honed concrete and exposed aggregate.
Which is better for a driveway, honed or exposed aggregate?
DSL Concrete lays both on driveways. Exposed aggregate gives a textured driveway with the stone visible on the surface. A honed driveway gives a smooth, contemporary look.
DSL Concrete lays exposed aggregate on driveways, paths, patios and entry steps. It also lays honed finishes on driveways, paths and steps. The choice is about the look you want and how it sits with the house.
The photos below show one driveway before and after. The worn grey concrete is replaced with exposed aggregate in the Hillarys White mix, described as a warm, honey-toned aggregate with natural stone pebbles. See driveways, paths and patios for more.


Which finish suits a pool surround?
DSL Concrete lays both around pools. A honed surround is smooth. An exposed aggregate surround is textured. Choose by the look you want and how it matches the rest of your outdoor area.
A honed pool surround can run as one continuous surface around the pool. An exposed aggregate surround shows the stone on the surface. See seamless pool surrounds for the honed approach.
Stone size matters on bare feet. Cement Concrete & Aggregates Australia (CCAA) says smaller 3 mm and 6 mm pebbles suit pools and areas with barefoot traffic, and names 10 mm as the largest size it recommends for bare feet. It adds that coarser aggregate gives a surface texture that is generally too rough. That is general industry guidance on stone size. It is not a statement about any one DSL job.


Which finish suits an alfresco, steps and a BBQ benchtop?
Honed concrete suits alfresco areas, steps and BBQ benchtops. Exposed aggregate suits entry steps and paths where you want the stone on show.
Honed concrete suits alfresco areas and entertaining spaces, with a modern, refined look. DSL Concrete also makes honed concrete BBQ benchtops, so ask about one when you request your quote. Honed stairs can be curved, as the Boranup stairs are.
Exposed aggregate suits entry steps and paths where you want the stone to show. Steps and paths can use either finish.



Can I use both finishes on one property?
Yes. DSL Concrete can carry one finish across several areas, or pair finishes that complement each other so your outdoor spaces flow together.
The mix sets the colour. In the photos on this site, the Hillarys White mix appears on an exposed aggregate driveway and on a honed pool surround and step. Browse the mixes in our guide to decorative concrete colours.


How do I choose between honed and exposed aggregate?
Choose at your quote. DSL Concrete visits, assesses your space and talks through the right finish with you. The quote is free.
Tell DSL Concrete your suburb, what you would like done and roughly how big the area is. Then ask for the free on-site quote. DSL Concrete does not publish prices and quotes after a visit.
Sources
These sources give general industry information. They do not describe DSL Concrete's own work.
More guides
Ready to talk about your space?
Tell us about your project and we'll arrange a time to visit, assess your space and talk through the right finish. Call 0405 818 456 or request a quote online.